Delivered for the vacuum high-speed measurement and control system of the Institute of Plasma, Chinese Academy of Sciences
2021-9-9
The vacuum environment high-speed test PM2.5 system provided by Essa high-speed motor for the Chinese Academy of Sciences was delivered for use; the difficulty of this set of devices is that it needs to operate in a vacuum environment, and it is necessary to ensure that the spindle is running at high speed to ensure heat dissipation. The YSA water-cooled series is selected. The vacuum box is a vacuum environment, and the cables and water cooling system circulate in the box to ensure that the spindle does not generate heat when it runs at high speed. The speed used is 46000rpm, the power is 3.0KW, and the voltage level is 220V. The measured pig will run smoothly, the heat dissipation is normal in a vacuum environment, the speed error is 0.001%, and the application is good!
Purpose: high-speed drive grating in vacuum environment for related test experiments
Requirements, the speed is 4600rpm, the speed error is less than 0.005%, and the heat generated by the motor is small
Features:
1. The high-speed use of the spindle runs smoothly, without vibration and low noise
2. The heat dissipation is good in a vacuum environment, and there is no high temperature of the motor affecting the experimental results
3. The drive control is accurate, the communication reads and writes, and there is no abnormality in the detection
